The company specializes in sales of PPS PPS polymer materials; Yen has: BK Black, NC this, dark / light coffee PPS number of degrees temperature, the white, yellow. Appearance: granular. PPS + 20% GF glass fiber reinforced, high toughness PPS, high-gloss, high temperature; PPS + 30% GF glass fiber reinforced, high temperature, rigidity, good strength, excellent surface gloss; PPS + 40% GF glass fiber-reinforced, high rigidity, ultra-resistant high temperature, high liquidity, low exhaust, less burr; PPS + 65% GF + CF + mineral glass fiber reinforced, high electrical performance, hydrolysis resistance, increased strength and creep resistance ; Our (company) can be modified according to customer requirements, dyeing, technical advisory services, such as full three-dimensional; PPS Another agent sales of imported raw materials! PPS black raw images as follows: PPS plastic material main properties are: excellent (1) heat resistance. Its melting point exceeds 280 ℃, heat distortion temperature exceeds 260 ℃, long-term use temperature of 220-240 ℃. Degradation at 700 ℃ 1000 ℃ inert gas remains 40% by weight in the air, the short-term heat resistance and thermal stability are better than long-term continuous use of all current engineering plastics. Specially modified varieties, heat distortion temperature up to 350 ℃ or more. (2) its flame retardant. Flame retardancy can be achieved UL94-0 level, oxygen index (LOI)> 57%. Its chemical structure makes it difficult to have good combustion performance, without adding flame retardant. Good (3) mechanical properties. Strong rigidity, high surface hardness PPS gear material, Rockwell hardness> 100HR, tensile strength> 170 MPa microwave base PPS, bending strength> 220MPa, notched impact strength> 16 MPa, flexural modulus of> 3.5 × 104, and has excellent resistance to creep and fatigue resistance. (4) excellent chemical resistance. Has not yet found a solvent to dissolve polystyrene below 200 ℃, inorganic acids, bases and salts of strong resistance. Good (5) dimensional stability. PPS plastic materials mold shrinkage is very low, less than 0.0025%, the absorption rate of less than 0.05%, the linear thermal expansion coefficient is small. Under high temperature and humidity conditions, still exhibit good dimensional stability. Therefore, in all aspects of mechanical, chemical, equipment, instrumentation and aviation, aerospace, ships with a wide range of uses. PPS temperature many degrees | Masahiro PPS plastic modified plant | PPS by Masahiro Plastics Co., Ltd., Dongguan City. Masahiro Plastics Co., Ltd. of Dongguan City (www.dgzhsl.com) is Dongguan, a leader in engineering plastics, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Masahiro leader in engineering plastics with the staff warmly welcome all inquiries negotiations to create a better future Masahiro plastics.